Chrysler Stratus RHD 1997 Interactive Electronic Service Manual page 328

THROTTLE POSITION SEN- THROTTLE BODY SOR THROTTLE POSITION SENSOR
JA
REMOVAL AND INSTALLATION (Continued)
(5) Loosen throttle body air inlet hose clamp.
(6) Release snaps holding air cleaner housing
cover to housing.
(7) Remove air cleaner cover and inlet hoses from
engine.
(8) Unplug TPS and idle air control motor connec-
tors (Fig. 38) and (Fig. 39).
Fig. 38 Throttle Position Sensor
Fig. 39 Idle Air Control Motor
THROTTLEBODY IDLE AIR CONTROL MOTOR CONTROL SPEED CABLE EGR BOLTS TUBE
(9) Pry retainer tab back on throttle cable and
slide cable out of bracket (Fig. 40). Remove cable
from throttle lever.
Fig. 40 Throttle Cable Attachment
(10) Slide Speed control cable out of bracket, if
equipped (Fig. 40). Remove cable from throttle lever.
(11) Remove EGR tube from intake plenum (Fig.
41).
Fig. 41 EGR Tube and Right Manifold SupportBolt
EGR TUBE SUPPORT THROTTLE CABLE
RELEASE TANG
IGNITION SYSTEM
BRACKET BOLT
8D - 19