Chrysler Stratus RHD 1997 Interactive Electronic Service Manual page 738

JA
DESCRIPTION AND OPERATION
HELPFUL INFORMATION . . . . . . . . . . . . . . . . . . . 3
DESCRIPTION AND OPERATION
POWER MIRRORS
The power mirrors use a single switch located in
the left door trim panel. The feed for the system is
supplied from the 10 amp Ignition-Off Draw (IOD)
fuse located in the junction block cavity 5. This fuse
also supplies power for the radio, interior lamps and
other components. Grounding for the power mirrors,
along with power door locks and A/C Heater control,
is provided through the Z1 circuit, which attaches to
the left side cowl.
SWITCH AND MIRROR OPERATION
The power mirror switch has a right and a left
position. Moving the switch to either of these posi-
tions changes the voltage path internal to the switch
(changes polarity at the motors).
When the switch is moved to the LEFT position
and mirror movement UP is selected, voltage is sup-
plied through the P93 circuit and the ground path is
through circuit P90. When the DOWN movement is
selected, the power and ground are reversed.
If a LEFT door mirror movement LEFT is selected,
voltage is supplied through the P95 circuit and the
ground is passed through circuit P91. When the left
door mirror RIGHT movement is selected, the power
and ground are reversed.
When the switch is moved to the RIGHT position
and mirror movement UP is selected, voltage is sup-
plied through the P92 circuit and the ground path is
8W - 62 POWER MIRRORS
8W-62 POWER MIRRORS
INDEX
page
through circuit P90. When the DOWN movement is
selected, the power and ground are reversed.
selected, voltage is supplied through the P94 circuit
and the ground is passed through circuit P91. When
the left door mirror RIGHT movement is selected,
the power and ground are reversed.
HEATER OPERATION
ments. These elements are activated when the oper-
ator has turned ON the rear window defogger.
Circuit C16 provides power for the heaters. The C15
circuit is the power supply for the rear window defog-
ger grid.
switch are protected by a 10 amp fuse located in the
junction block cavity 15. Grounding for the mirror
heaters is provided on the Z1 circuit and terminates
at the left side cowl.
HELPFUL INFORMATION
lamp, dome lamp, time delay relay, glove box lamp,
and vanity lamps. Check for proper operation of
these items
ten for the motors to click or try to move. Some
movement or clicking indicates a poor connection or a
mechanical problem with a mirror
POWER MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . 3
If a RIGHT door mirror movement LEFT is
The mirrors are also equipped with heating ele-
The heated mirrors and rear window defogger
• Check the IOD fuse located in the junction block
• Circuit M1 supplies voltage to the radio, cargo
• Move the switch to its various positions and lis-
8W - 62 - 3
page