LEFT REAR SIDE VIEW
FWD
7 - 28
COOLING SYSTEM
REMOVAL AND INSTALLATION (Continued)
INSTALLATION
(1) Thoroughly clean core hole and heater seat
(Fig. 38).
(2) Insert heater assembly with electrical connec-
tor position at the top of the core hole.
(3) With heater seated, tighten center screw
securely to assure a positive seal.
2.5L ENGINE
BLOCK HEATER F WD
Fig. 38 Engine Block Heaters
BLOCK HEATER
RIGHT REAR SIDE VIEW
LEFT
REAR
(4) Fill cooling system with coolant to the proper
level, vent air, and inspect for leaks. Pressurize sys-
tem with Radiator Pressure Tool before looking for
leaks.
The power cord must be secured in its retainer
clips, and not positioned so it could contact linkages
or exhaust manifolds and become damaged.
SIDE
FWD
2.4L ENGINE
2.0L ENGINE
VIEW
JA