Table of Contents
Advertisement
Fire Alarm Control Panel PL-1000
13.1 Configuration – access to menu
After having connected the devices and the power supply, activate it turning on the control unit and then connecting the batteries as shown in the previous setup and
connection paragraph. When switched on, the programming of the panel must be carried out to allow detecting the connected devices.
1.
On the touch screen display press the arrow
2.
The page below will be displayed. Insert the password of level 2 (2222) and press the "enter" key to confirm the password.
32
on the right and then press the gear icon
at the top right:
M-169.1-SERIE-PL-EN / 09.2022
Advertisement
Table of Contents
