Unpacking And Checking The Delivery - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

Planning the use

3.2 Unpacking and checking the delivery

3.2 Unpacking and checking the delivery
Procedure
1. Please check the packaging material for transport damage upon delivery.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
3. Unpack the device.
4. Keep the packaging material in case you have to transport the unit again.
Note
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
5. Please keep the enclosed documentation in a safe place. You will need the
6. Check the package contents for completeness and any visible transport damage. Check
7. Should the contents of the package be incomplete or damaged, please inform the
8. Note the identification information as described in the chapter "Identification data of the
26
shipping company in charge. Have the shipper confirm the transport damage
immediately.
NOTICE
Do not lie the device on its back. This will avoid any damage to an optical drive which
may be present. Lie the front side on a soft surface to avoid damaging the front panel
USB port.
documentation when you start up the device for the first time.
for completeness using the enclosed scope of delivery list.
responsible supply service immediately and fax us the enclosed form "SIMATIC IPC/PG
quality control report".
WARNING
Make sure that a damaged device is not installed nor put into operation.
device".
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04