Unpacking And Checking The Delivery Unit - Siemens SIMATIC 647B Getting Started

Application planning

3.2 Unpacking and checking the delivery unit

3.2 Unpacking and checking the delivery unit
Unpacking the device
Note the following points when you unpack the unit
● It is advisable not to dispose of the original packing material. Keep it in case you have to
● Please keep the documentation in a safe place. It is required for initial commissioning and
● Check the delivery unit for any visible transport damage.
● Verify that the shipment contains the complete unit and your separately ordered
● Please inform Siemens AG by means of the enclosed SIMATIC IPC/PG quality control
Noting down the device identification data
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the following data in the table below:
● Serial number: The serial number (S VP) is located on the rating plate inside the front
● Order number of the device
● Ethernet address: The Ethernet address of the device is available in BIOS Setup (F2
16
transport the unit again.
is part of the device.
accessories. Please inform your local dealer of any disagreements or transport damage.
report form.
door.
Figure 3-1 Rating plate
function key) , at Info > (F1 function key) > LAN Address.
www.aotewell.com
sales@aotewell.com
SIMATIC Rack PC 647B
Getting Started, 12/2008, A5E02147333-01
Industry Automation
+86-755-8660-6182