8.3.4
Deactivate touch functionality
Procedure
1. Select "Start > Programs > UPDD > Settings".
2. Select the corresponding controller
3. Remove the tick in the "Enabled"
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
The dialog box "UPDD Console" opens.
Figure 8-3
Deactivate touch functionality
The controller is deactivated.
Note
If you close the dialog box using "Close", the touch functionality remains deactivated.
If not mouse is connected, you can also reactivate the Touch Panel by means of a key
combination. Restart the "UPDD Console" via the start menu.
The keyboard entry <Alt+p> opens the tab "Properties"
reactivated by entering <Alt+n>. (option box "Enabled"
8.3 Additional drivers and applications
①
.
②
option box in the "Properties"
③
②
Operation and configuration
③
tab.
. Then the Touch Panel can be
)
85