Switching Off The Device; Additional Drivers And Applications - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

8.2.3

Switching off the device

Note
After shutting down the operating system, the power supply to the device is not switched off.
The fans continue to turn, in order to cool the device sufficiently even when it is switched off.
Procedure
1. Shut down the operating system.
2. Switch the device off using the On/Off switch.
3. In order to isolate the power supply completely, turn off the power at the power supply
8.3

Additional drivers and applications

The necessary drivers and applications are available on the supplied "Documentation and
Drivers" CD.
Note
The supplied drivers and applications have been system-tested and are approved for this
device. No warranty can be provided for other software.
Press the "Help" button to obtain information concerning the buttons of a dialog.
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
NOTICE
If you are using the Windows XP Professional operating system, wait for the display to
go dark.
switch and pull out the plug from the device.
WARNING
Always pull out the plug to isolate the device from the mains.
Operation and configuration
8.3 Additional drivers and applications
81