Siemens SIMATIC HMI IPC677C Operating Instructions Manual page 228

Detailed descriptions
16.4 BIOS-Setup
Advanced menu > SATA/PATA Configuration
Figure 16-8
Entry
SATA Controller
SATA Controller mode
Serial ATA Port 0
Serial ATA Port 1
Serial ATA Port 2
Serial ATA Port 3
Serial ATA Port 4
Serial ATA Port 5
228
"SATA/PATA Configuration" submenu
Meaning
Enable or disable the SATA and PATA controllers.
Set operating mode of the SATA controller:
Enhanced: SATA Ports 0-3 operate in Legacy mode, SATA
•
Ports 4-5 in native IDE mode
AHCI : Disable or enable the AHCI support
•
RAID: Disables or enables RAID support
•
Submenu for SATA Port 0 configuration
Submenu for SATA Port 1 configuration
Submenu for SATA Port 2 configuration
Submenu for SATA Port 3 configuration
Submenu for SATA Port 4 configuration
Submenu for SATA Port 5 configuration
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04