Siemens SIMATIC HMI IPC677C Operating Instructions Manual page 104

Operation
9.2 Device with key panel
Procedure
1. Label the DIN A4 film with a laser printer, for example, using the print format templates for
2. Cut the labeling strips along the pre-printed lines.
Note
Do not insert handwritten labeling strips until the ink has dried.
3. Insert the labeling strips into the slots provided from the rear side of the control unit.
(1)
(2)
(3)
104
MS Word on the "Documentation and Drivers" CD.
Figure 9-5 Rear of the control unit, using example of a 12" key panel.
Similar to illustration, can deviate from device
Slots for long labeling strips, vertical keypads
Slots for short labeling strips, horizontal keypads
Slots for labeling strips, horizontal keypads
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04