Alphanumeric And Numeric Keys - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

9.2.3.2

Alphanumeric and numeric keys

Alphanumeric keys
Enter letters, special characters, blank spaces and underline using the alphanumeric keys.
(1)
(2)
Figure 9-3
Toggling between lower-case and upper-case letters
Enter the lower-case letters using the pre-defined assignment of the alphanumeric keys. To
enter an upper-case letter, proceed as follows:
1. Hold down the <Shift> key.
2. Activate the desired alphanumeric key at the same time. The displayed upper case letter
3. To enter lower case letters, release the <Shift> key.
4. You can, however, also activate the Caps Lock function using the <F
Numeric keys
Enter the numerals "0" to "9" and special characters, e.g. the decimal point, using the pre-
defined assignment of the numeric keys.
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Underline
Space character
Alphanumeric keys 2
will be entered.
The LED on the <Shift> key is then also lit.
Operation
9.2 Device with key panel
> and <Shift> keys.
N
101