Installing / Removing Hard Disks - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

Service and maintenance
11.7 Expansion and parameter assignment
11.7.4.4

Installing / removing hard disks

Removing 2.5" drives
How to remove a 2.5" drive
1
2
3
4
Removing a 3.5" drive
How to remove a 3.5" drive
1
2
3
4
Note
Note that special screws with inch threads (screw designation 6-32x3/16''-St-G3E) are used.
130
Remove the drive bay module.
①
Unscrew the drive.
Remove the hard disk drive and the steel mounting bracket from the bay.
Disconnect the power supply and the data cable from the drive.
Remove the drive bay module.
Disconnect the power supply and the data cable from the drive.
①
Remove the screws of the
drive.
Remove the hard disk drive from the bay.
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04