Siemens SIMATIC HMI IPC677C Operating Instructions Manual page 4

Preface
Conventions
Representation
"File"
"File > Edit"
<F1>, <Shift>+<F1>
The "IPC677C", "control unit" and "computer unit" are uniformly referred to as "device" in
these operating instructions. The full term is only used when a concrete reference is
necessary.
Furthermore, the "CP 1616 onboard" is referred to as "CP".
Note
A note is important information about the product, handling the product or a reference to
specific sections of the documentation that require special consideration.
Trademarks
All names labeled with ® symbol are registered trademarks of Siemens AG. Other names
used in this documentation may be trademarks, the use of which by third parties for their
own purposes could violate the rights of the owner.
HMI
SIMATIC
SIMATIC HMI
SIMATIC WinCC
SIMATIC WinCC flexible
Panel PC 677B
IPC677C
4
®
®
®
®
®
®
®
Validity
Terminology that appears in the user interface, for example
•
menu commands, tabs, buttons
Required input, for example limit values, tag values
•
Path information
•
Operational sequences, for example, menu commands, shortcut
menu commands
Keys and key combinations
Operating Instructions, 04/2013, A5E02722710-04
SIMATIC HMI IPC677C