Cursor Keys - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

Operation
9.2 Device with key panel
Enter special characters, arithmetic signs and signs
Special characters, arithmetic signs and signs are also assigned to most of the alphanumeric
and numeric keys. These signs are indicated by white symbols on the top left of the keys. To
enter such a sign, proceed as follows:
1. Hold down the <F
2. Activate the desired alphanumeric or numeric key at the same time. The displayed
3. To enter the signs of the pre-defined assignment again, release the <F
9.2.3.3

Cursor keys

Navigate, scroll or move the writing mark using the cursor keys. The cursor keys correspond
to the usual keys of the PC keyboard.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Figure 9-4
102
> control key.
N
special character, arithmetic sign or signs will be entered.
<Left> key
<Up> key
<Right> key
<Down> key
Position 1 key (Home)
<Page up> key
<Page down> key
Cursor keys
> key.
N
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04