Unpacking And Checking The Delivery - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Operating Instructions (compact)

1.2 Unpacking and checking the delivery

1.2 Unpacking and checking the delivery
1. Please check the packaging material for transport damage upon delivery.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
3. Unpack the device.
4. Keep the packaging material in case you have to transport the unit again.
5. Please keep the enclosed documentation in a safe place. You will need the
6. Check the contents of the package for completeness and transportation damage. Check
7. Should the contents of the package be incomplete or damaged, please inform the
8. Note the identification information (see chapter "Identification data of the device").
Notes on display
A small number of faults in the display is unavoidable.
Bad pixels
Permanently bright and permanently dark pixels
Permanently bright, green pixels
6
shipping company in charge. Have the shipper confirm the transport damage
immediately.
NOTICE
Lie the front side on a soft surface to avoid damaging the front panel USB port.
Note
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
documentation when you start up the device for the first time.
for completeness using the enclosed scope of delivery list.
responsible supply service immediately and fax us the enclosed form "SIMATIC IPC/PG
quality control report".
WARNING
Make sure that a damaged device is not installed nor put into operation.
Permissible number
≤ 12
≤ 5
Operating Instructions (Compact), 05/2009, A5E02368077-01
SIMATIC HMI IPC577C