Unpacking And Checking The Scope Of Delivery - Siemens SIMATIC Rack PC 840 Manual

Setting Up and Operating the SIMATIC Rack PC 840
3.1

Unpacking and Checking the Scope of Delivery

Unpacking the Rack PC
Unpack your Rack PC programming device as follows:
1. Remove the packing.
2. Do not throw the original packing away. Keep it in case you have to transport
the unit again sometime in the future.
3. Please keep the documentation in a safe place. It is required during the initial
start up and is part of the device.
4. Check the packing and its contents for any shipping or transport damage.
5. Check with the packing list to make sure no components are missing. Also
check the accessory parts, which you can order separately.
6. Please inform your local dealer of any shipping or transport damages and of
outstanding items indicated on the packing list.
Recording the Serial Number and the Ethernet address
7. Enter the serial number and the Ethernet address of your PC in the table of
the Getting Started. You can find the serial number on the type label attached to
the rear of the device. The Ethernet address can be found in the BIOS setup
settings in the main menu under the 'Hardware Options' function.
The device can precisely be identified with the help of these numbers in case of
repairs or theft.
Enter the Microsoft Windows "Product Key" from the "Certificate of
Authenticity"
8. Enter the Microsoft Windows "Product Key" from the "Certificate of Authenticity"
(COA) in the table of the Getting Started. You will find the "Product Key" on the
inside of the front door. You need the Windows "Product Key" if you want to re-
install the operating system.
3-2
SIMATIC Rack PC 840 Manual
A5E00104826-03