Installing Pci/Pcie Cards; Notes On The Modules; Installing / Removing Expansion Modules - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

11.7.3

Installing PCI/PCIe cards

11.7.3.1

Notes on the modules

The device is designed for use with modules conforming to PCI specifications V 2.2. 5 V 32-
bit PCI modules, universal (5 V & 3.3 V) 32-bit PCI modules and PCI Express x16 modules
can be operated. The permitted module dimensions are specified in the section Dimensional
drawings for the installation of expansion modules (Page 193).
11.7.3.2

Installing / removing expansion modules

Preparation
Disconnect the device from the mains.
Installing expansion modules
How to install an expansion module (PCI / PCI express card):
1
2
3
4
5
6
7
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Open the device (Page 121).
Loosen the fastening screw
remove the module bracket
①
Remove the slot cover
intended slot.
Insert expansion module
the slot provided.
⑥
Observe the guide rail
PCI modules.
Mount the module bracket and
③
insert the slider .
①
Fasten the slot cover
expansion module.
Close the device.
④
and
⑤
.
from the
②
into
with long
of the
Service and maintenance
11.7 Expansion and parameter assignment
125