3. Click on the "Settings" button. The "BbcScreenSaver" dialog box opens.
4. Set the desired brightness value for the activated display using the slider or the "-" and
5. Under "Background" select from the following options:
6. Confirm the set values with "OK" or terminate the input with "Cancel" without saving the
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
The following figure shows the dialog box using an example with two devices. A
secondary device is optional and is not supported by all devices.
"+" buttons.
Note
The set value is retained following a restart and you can only change it in the
"BBCScreenSaver" dialog box.
– "Blank screen": The desktop is shown with a black background.
– "Show desktop": The desktop will be transparent.
modified settings.
Note
If you set the value 0, the backlighting of all connected monitors is turned off.
Operation and configuration
8.3 Additional drivers and applications
93