Removing/Installing An Ssd Drive - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

11.7.4.5

Removing/installing an SSD drive

Preparation
Disconnect the device from the mains.
Note
The use of the SSD drive excludes the simultaneous use of a hard disk.
Installing an SSD drive
How to install the SSD drive
1
2
4
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Remove the hard disk cover and
place it on the device.
Connect the power supply cable and
the data cable to the SSD drive.
Fasten the SSD drive with four (4)
①
screws .
Mount the hard disk cover.
Service and maintenance
11.7 Expansion and parameter assignment
131