Standards, Certificates And Approvals - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

Appendix
A.2 Standards, certificates and approvals
Low-voltage directive
The device with AC power pack complies with the requirements of EC low voltage directive
2006/95/EC (Low Voltage Directive). Compliance with this standard has been verified
according to: EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011
The device with DC power pack also complies with this standard but does not fall within the
area of validity of the EU low-voltage directive.
Declaration of conformity
The EC declaration of conformity and the corresponding documentation are made available
to authorities in accordance with the EC directives stated above. Your sales representative
can provide these on request.
Design guidelines
Adhere to the installation guidelines and safety instructions given in this documentation
during commissioning and operation.
Connecting peripherals
Interference immunity requirements are met if connected peripherals are suitable for
industrial applications in accordance with EN 61000-6-2. Always use shielded cables to
connect peripherals.
A.2

Standards, certificates and approvals

Information on the type plate
Note
The currently valid approvals are to be found on the device's rating plate.
ISO 9001 certificate
The Siemens quality management system for all production processes (development,
production and sales) meets DIN ISO 9001:2000 requirements.
This has been certified by DQS (the German society for the certification of quality
management systems).
Q-Net certificate no.: DE-000656 QM08
260
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04