General Information - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

1.2

General Information

Overview
NOTICE
The device must only be operated in closed rooms. Failure to comply nullifies the warranty.
Operate the device only in accordance with the ambient conditions specified in the technical
specifications. Protect the device against dust, moisture and heat. Do not place the device in
direct sunlight.
Transport
Unpack the device at its installation location. Transport the device only in the original
packaging. Do not transport the device when it is mounted.
Note
Adhere to these stipulations each time the device is transported, otherwise the guarantee is
void.
NOTICE
Condensation
When transporting the device at low temperatures, ensure that no moisture gets on or into
the device. This also applies if the device is subjected to extreme changes in temperature.
Commissioning
Allow the device to slowly adjust to room temperature before commissioning the device. Do
no place the device near heat radiation. If moisture condensation occurs, wait at least 12
hours before you switch on the device.
Vibration
Optical drives are sensitive to vibration. Inadmissible vibration during operation may result
in loss of data or damage to the drive or data medium.
Before transporting the device, wait at least 20 seconds to allow the drive to stop
completely.
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Safety
1.2 General Information
13