Siemens SIMATIC HMI IPC677C Operating Instructions Manual page 224

Detailed descriptions
16.4 BIOS-Setup
Menu layout
The screen is divided into four sections. In the top section
[Main], [Advanced], [Security], [Power], [Boot], [Version], [Exit]. You can select various
settings or submenus in the left middle section
④
input.
The following figures represent examples of specific device configurations. The screen
content may deviate slightly depending on the equipment actually supplied.
You can move between the menu forms using the cursor keys [←] left and [→] right.
Menu
Main
Advanced
Security
Power
Boot
Version
Exit
224
for currently selected menu entries; the bottom section contains information for operator
Meaning
System functions are set here
An extended system configuration can be set here
This is where setting security functions such as the password are set.
The behavior of the device after a power failure and after wake events is specified
here.
This is where the boot priority is specified.
This shows device-specific information (such as the release version).
Used for terminating and saving.
②
, you can select the submenus
③
. Short help texts are displayed on the right
Operating Instructions, 04/2013, A5E02722710-04
SIMATIC HMI IPC677C