Using The Integrated Mouse; Device With Touch Panel; Operating A Touch Panel - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

9.2.6

Using the integrated mouse

The position on which you press the middle round button of the integrated mouse determines
the direction in which the cursor moves. The amount of pressure determines the speed of
the cursor.
Alternatively to using the integrated mouse you can also connect an external mouse to the
front USB port.
Figure 9-6
9.3

Device with touch panel

The individual variants differ in their dimensions and size of the display.
Figure 9-7
(1)
(2)
9.3.1

Operating a touch panel

On the display that is touch-sensitive due to the touch sensor, application-specific user
interface elements, for example buttons, are displayed. When you tap the command button
with your finger, the function assigned to the button is activated.
The following types of pressure are permissible:
● Using a touch pen with a 1 mm radius at the point: 25 g.
● Using a silicone finger with a diameter of 1.6 cm: 50 g.
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Integrated mouse
Example of a 15" touch panel
Display with touch panel
USB ports (optional)
Operation
9.3 Device with touch panel
105