Siemens SIMATIC HMI IPC677C Operating Instructions Manual page 261

Software License Agreement
The device can be supplied with or without preinstalled software. For devices with
preinstalled software, please note the relevant license agreements.
Approvals for the USA, Canada and Australia
Product safety
The following approval is available for the device:
EMC
USA
Federal Communications
Commission
Radio Frequency
Interference Statement
Shielded Cables
Modifications
Conditions of operations
CANADA
Canadian Notice
Avis Canadian
AUSTRALIA
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Underwriters Laboratories (UL) in accordance with UL 508 and C22.2 No. 142
(IND.CONT.EQ)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conformé à la norme NMB-003
du Canada.
This product meets the requirements of the standard EN 61000-6-4:2007
Generic standards - Emission standard for industrial environments.
A.2 Standards, certificates and approvals
Appendix
261