Setting Up The Microsoft Windows Operating System; Windows Xp And Windows Embedded Standard 2009 - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

7.4

Setting up the Microsoft Windows operating system

Introduction
The setup wizard appears immediately following the startup of the device. The wizard is
used to set the parameters of the operating system.
Note
The dialogs of the setup wizards differ slightly in some places for the Windows operating
systems.
In order to change to the next dialog, click on the ">>" button. In order to change the entry in
the previous dialog, click on the "<<" button.
Procedure
1. Accept the Microsoft licensing agreement.
2. Leave the regional settings of the operating system unchanged. If required, adjust the
3. Enter the company names and user names.
4. If this PC name is already in use as you attempt to connect the device to a network: Enter
The system settings are updated. The desktop is set up. The setup of the operating system
is complete.
7.5

Windows XP and Windows Embedded Standard 2009

First commissioning
● The "SIMATIC PC Wizard" program is automatically started once during the first
● The wizard will automatically set the device-specific drivers and applications at the initial
● The hardware is detected automatically.
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
regional settings of the operating system only after commissioning.
a new PC name for identification.
The operating system will restart automatically.
commissioning.
start of the operating system.
7.4 Setting up the Microsoft Windows operating system
Commissioning
61