Removing / Installing An Optical Drive - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

11.7.4.3

Removing / installing an optical drive

Preparations
Isolate the device from mains and disconnect all connection cables.
Required tools
You need the following screwdrivers to remove the the DVD burner:
● Torx T10 to mount/remove the drive bay
● Torx T6 to install/remove the drive
Removing the DVD burner drive
How to remove a DVD burner drive
1
2
3
4
5
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
Remove the drive bay module.
①
Loosen the screws on the DVD
burner drive bay.
Remove the retaining screws
the drive.
Disconnect the power supply and the data cable from the drive.
Lift the drive out.
11.7 Expansion and parameter assignment
①
of
Service and maintenance
129