Bios Setup Default Settings - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

Detailed descriptions
16.4 BIOS-Setup
16.4.12

BIOS Setup default settings

Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
Note
The default setup settings vary depending on the ordered device configuration.
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
BIOS Setup default settings
System parameters
Main
System Time
System Date
System parameters
Advanced>Peripheral
Configuration
Internal COM 1
Onboard Ethernet 1
Onboard Ethernet 2
PCI – MPI / DP
244
Default settings
hh:mm:ss
MM/DD/YYYY
Default settings
Auto
Enabled
Enabled
Enabled
Operating Instructions, 04/2013, A5E02722710-04
Local settings
Local settings
SIMATIC HMI IPC677C