Further Actions In Step 7/Ncm Pc - Siemens SIMATIC HMI IPC677C Operating Instructions Manual

Detailed descriptions
16.6 Communications processor CP 1616 onboard
16.6.3

Further actions in STEP 7/NCM PC

Configuring
Your PC is now ready, although you still have to configure the SIMATIC NET communication
software. The rest of the procedure is described in the "Commissioning PC Stations" manual
(on the Windows PC that also contains STEP 7/NCM PC: Start > Simatic > Documentation >
English > Commissioning PC Stations).
258
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04