Table of Contents
Advertisement
Detailed descriptions
16.5 Communication processor CP 1616 onboard
NOTICE
When loading the firmware or commissioning the module, be aware that the CP 1616
onboard takes five MAC addresses (always in direct sequence). The first two are shown in
the BIOS.
Example
The lowest address is for the layer 2 communication. The second is for Ethernet/PROFINET
communication.
16.5.3
Further actions in STEP 7/NCM PC
Configuring
Your PC is now ready, although you still have to configure the SIMATIC NET communication
software. The rest of the procedure is described in the "Commissioning PC Stations" manual
(on the Windows PC that also contains STEP 7/NCM PC: Start > Simatic > Documentation >
English > Commissioning PC Stations).
212
SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02
Advertisement
Table of Contents
