Further Support And Sales Information - Siemens SIMATIC Box PC 620 Getting Started

No response from ports COM1,COM2, LPT1 or PROFIBUS/MPI
• Ports are set to "Disabled"in the BIOS Setup
program.
<\> key is not displayed
• Incorrect keyboard driver being used
+

Further Support and Sales Information

If you have further questions on how to use the Box PC 620, please contact your Siemens
representative or the SIMATIC Hotline:
• You can obtain general up-to-date information in the Internet under
http://www.siemens.com/simatic-pc
• You can find your local partner for Automation & Drives in our Partner Database in the Internet
under
http://www.siemens.com/automation/partner
Getting Started Box PC 620
A5E00131477-03
• Set the ports COM1,COM2, LPT1 or
PROFIBUS/MPI to "Enabled" in the submenu
"Hardware Options" in the BIOS Setup
program.
• Load correct keyboard driver
Enter <ALT> <9><2> for < \>
17