Removing And Installing An Optical Drive - Siemens SIMATIC PANEL PC 877 Operating Instructions Manual

12.4.5.3

Removing and installing an optical drive

Procedure
1. Unscrew the 4 screws (1) holding the drive and slide the drive out.
Figure 12-4
1. If you need to completely remove the drive, remove drive connectors (1) and (2) from the
device.
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
Installing and removing the optical drive
12.4 Installing and removing hardware components
Maintenance and service
12-21