Inserting An Expansion Module - Siemens SENTRON ATC6300 Manual

5.1.4.2

Inserting an expansion module

In order to insert an expansion module, proceed as follows:
Hazardous voltage. Will cause death or serious injury.
Turn off and lock out all power supplying this equipment before working on the device.
Replace all covers before power supplying this device is turned on.
Disconnect the power supply of the device.
1. Remove the protective cover of the slots.
2. Attach the upper hook of the expansion module to the fixture of the ATC6300.
3. Insert the expansion module.
Press on the expansion module until it latches into place.
You will find further information on the expansion modules in the operating instructions
● ATC6 DI/DO expansion modules
(https://support.industry.siemens.com/cs/ww/en/view/109751947)
● ATC6 Ethernet expansion modules
(https://support.industry.siemens.com/cs/ww/en/view/109751948)
● ATC6 RS485 expansion modules
(https://support.industry.siemens.com/cs/ww/en/view/109751949)
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
WARNING
Functions
5.1 Basic functions
43