Using Finisher Fs-532 Manually - Konica Minolta bizhub PRESS 1250 User Manual

8.4 Using Finisher FS-532
The Punch Screen will be displayed.
5
Select the desired punch position.
6
Press [OK].
% To restore the previous setting, press [Cancel].
% To disable the function while keeping the current setting, press [Function OFF].
The Output Setting Screen will be restored.
7
Press [OK] on the Output Setting Screen to return to the Copy Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
NOTICE
The primary (main) tray gradually goes down while printed materials are output. DO NOT allow any ob-
ject to interfere with the operation of the primary (main) tray on the left side of the finisher, as any inter-
ference may cause damage to the finisher.
8.4.7

Using Finisher FS-532 Manually

Finisher FS-532 mounted with Post Inserter PI-502 can be operated manually with the operation panel pro-
vided on the post inserter.
Finisher FS-532 provides the following output modes according to the optional configuration.
bizhub PRESS 1250/1052
8
8-26