Using Finisher Fs-607 Manually - Konica Minolta bizhub Pro C6500 User Manual

Output Applications
12.9

Using Finisher FS-607 Manually

The Finisher FS-607 with Paper inserter PI-502 installed can be operated
manually, using the operation panel provided on the paper inserter.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are de-
scribed below.
- Finisher FS-607 + Paper inserter PI-502
– Staple (1 staple / 2 staples)
– Fold & Staple
– Multi Tri-Fold
- Finisher FS-607 + Paper inserter PI-502 + Punch kit PK-512
– Staple (1 staple / 2 staples)
– Fold & Staple
– Multi Tri-Fold
– Punch
Fold&Staple
1 oblique staple
Prerequisites
0 Paper should be placed only in the lower tray of the paper inserter. Upper
tray cannot be used.
0 Staple (1 staple / 2 staples) and Punch can be used in combination.
bizhub PRO C6500
2 parallel staples
Multi Tri-Fold
12
Start/Stop button
Punch
12-51