Konica Minolta bizhub PRESS 1250 User Manual page 225

6.6 Paper Presetting
3
Press [Change Set] on the right side of [Paper Size].
The Size Setting Screen will be displayed.
4
Press [Wide Paper].
5
Press the desired size key.
6
Make a selection for [Image Pos.]
% Select [Lead Edge], [Rear Edge], or [Center] provided under [Image Pos.] to specify the standard of
image position.
7
Press [Size Input] to display the Size Input Screen.
% Wide paper varies in dimensions even though having the same size name. Be sure to check and
enter actual dimensions of the wide paper to be used.
8
Enter the lengthwise/widthwise dimensions of the paper.
% Press [(1)], then use the touch panel keypad, [,], [+], or control panel keypad to enter the desired
lengthwise dimension. Entered size should fall within the range from the lengthwise dimension of
the standard size corresponding to the wide size selected in step 2, to a maximum of 12.73 inches.
% Press [(2)] to similarly enter the desired widthwise dimension. Entered size should fall within the
range from the widthwise dimension of the standard size corresponding to the wide size selected
in step 2, to a maximum of 18.19 inches.
% Available range depends on the paper tray to be loaded.
9
Press [Size Select] to return to the Size Select Screen.
10
Press [OK] on the Size Setting Screen to return to the Paper Presetting Screen.
bizhub PRESS 1250/1052
6
6-47