Inserting A New Staple Cartridge Into Fs-113 Finisher - Konica Minolta 7222 User Manual

Inserting a New Staple Cartridge into FS-113 Finisher

When the staple cartridge of the FS-113 Finisher is empty, the Basic Screen displays
the following message in the message area.
Follow the procedure below to replace the staple cartridge.
Use only the staples supplied by us. To purchase, please contact your
service representative.
1.
Holding the finisher handle on the top, slide the Finisher to the left
until it stops.
2.
Open the finisher right side door.
11-6