7.8
Programming Different Settings for an Output Job: Program Job
8
Position the original of the next job.
9
Repeat step 5 through step 8 to scan the originals of all jobs.
10
When all jobs are scanned, press [Conf. & Scan Fin.].
The Separate Scan mode is disabled.
11
Select an output mode for the entire program job.
% Press [Output Setting] on the Copy Screen to display the Output Setting Screen. Select the desired
output mode. The output mode selected here will be applied to all jobs.
% If you have selected the Staple mode in step 5 and specified to have each bunch stapled after every
scanning, you do not need to select this option.
bizhub PRESS 1250/1052
7
7-33