Konica Minolta bizhub PRESS 1250 User Manual page 283

7.12 Eliminating Copy Marks Along Borders: Frame Center Erase
When [Center Erase] is selected, the value for Center Erase under [Erase Width Setting] is highlighted.
% Use the keypad, [,], or [+] on the screen to enter the desired erase width.
% With [Frame Erase] selected at the same time, select [Center] under [Erase Width Setting] before
entering an erasure amount.
6
Press [OK] to complete the setting.
% To restore the previous setting, press [Cancel].
% To cancel the Frame Center Erase function with the current setting saved, press [Function OFF].
7
Press [OK] on the Application Screen to return to the Copy Screen.
The Copy Screen will be restored with the Frame Center Erase icon displayed under [Application].
8
Select additional copy conditions, as desired.
9
Enter the desired print quantity from the control panel keypad.
10
Press Start on the control panel.
% Printing will not start without the Copy Screen displayed. Please make sure to display the Copy
Screen.
bizhub PRESS 1250/1052
7
7-46