Folding Copies: Z-Fold/Tri-Fold-In/Tri-Fold-Out/Double Parallel/Gate/Half-Fold - Konica Minolta bizhub PRESS 1250 User Manual

8.3 Using Folding Unit FD-503
Number of punch holes
Hole diameter
Hole pitch
Paper size
Paper weight
When Folding Unit FD-503 is used as a single finishing option, the primary (main) tray and multi folder tray
are available to be allotted with output modes as described below.
Tray
Primary (main) tray
Multi folder tray
d
Reference
The secondary (sub) tray is also available in place of the multi folder tray. Contact your service representative,
if desired.
8.3.1 Folding Copies: Z-Fold/Tri-Fold-in/Tri-Fold-out/Double Parallel/Gate/Half-
Fold
Follow the procedure below to select the desired one from six fold types.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Press [Fold].
The Fold Screen will be displayed.
5
Select the desired fold type.
% Select the desired one from the keys under [Fold Type].
% Press either [Outside Print] or [Inside Print] provided under [Print Side] to select the print side.
% The print side selection is unavailable for Z-Fold mode.
bizhub PRESS 1250/1052
2 holes, 3 holes
2 holes: 0.26 ± 0.02 inches
3 holes: 0.31 ± 0.02 inches
2 holes: 2.75 ± 0.02 inches
3 holes: 4.25 ± 0.02 inches
A3 w to A5 v
17 to 33 lb Bond
Output mode
Half-Fold, Z-Fold, Punch, not processed (straight delivery)
Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate
8
8-12