12.3
If [PM Call] Message Is Displayed
12.3
If [PM Call] Message Is Displayed
After a set number of copies (1,000,000 copies) have been made on your machine, Preventive Maintenance
(PM) will be required for maintaining optimal performance.
When preventive maintenance is due, a message and the PM Call icon will prompt you to contact your service
representative for maintenance.
Each part has a different replacement cycle. And the replacement cycle can be changed. Contact your serv-
ice representative, if desired.
d
Reference
The administrator can call for service from the Administrator Setting in the Utility mode.
In this case, you do not have to make a call for preventive maintenance, because your machine has been
monitored automatically by your service representative.
bizhub PRESS 1250/1052
12
12-8