Konica Minolta bizhub PRESS 1250 User Manual page 378

8.8 Using Perfect Binder PB-503
% Cover Print can be set to [ON] when one of [Tray 1] to [Tray 8] is specified as the cover tray. By se-
lecting [ON], Cover Print Side becomes selectable.
% The cover print operations will differ, depending on whether the number of original sheets is odd or
even. For details of finished result with each setting specified, see page 8-43.
% With Cover Trimming set to [ON], if the trimming width estimated by the machine does not fall within
the range from 5 mm to 40 mm, a message will be displayed to inform you that the trimming mode
is unavailable. If the trimming width exceeds 10 mm, the machine will automatically trim the cover
whether this function is activated or not.
13
Specify the spine width.
% Press [Change Set] on the right side of [Spine Width (1-30 mm)] to display the Spine Width Screen.
Use the touch panel keypad, [,], [+], or the control panel keypad to enter the desired value.
% This setting is effective with Cover Print set to [ON].
% Press [OK] to restore the Perfect Bind Screen.
14
Make fine adjustments in the lead edge, trimming width, and image position of the cover.
% Press [Change Set] on the right side of [Fine Adjustment] to display the Fine Adjustment Screen.
bizhub PRESS 1250/1052
8
8-53