Konica Minolta bizhub PRESS 1250 User Manual page 443

10.2 Checking Feature Selections Before Printing: Mode Check
Job settings
Original Setting
Quality Adjustment
Zoom Setting
Output Setting
Application
Proceed to step 7 to directly start copying.
6
Make a sample copy to view the results of the selections.
% Press [Proof Copy] or [Proof Print (1st Sheet)] on the Mode Check Screen, or press Proof Copy on
the control panel, as required.
% If Separate Scan mode is selected, press Start on the control panel to scan all the original before
pressing Proof Copy.
bizhub PRESS 1250/1052
Description
Press the title key to display the setting screen for each. Change the
setting as desired, then press [OK].
To cancel the change, press [Cancel]. Press [Default Set] to restore
the initial settings.
Embossed setting keys are available for change. Pressing the keys
will display the subsequent screen provided for each. Pressing [Out-
put Setting] will display the Output Setting Screen to allow you the
setting change from that screen.
Selected functions are displayed as a list. Pressing an embossed set-
ting key will display the subsequent screen provided for that setting.
For functions without subsequent screens, a dialog will appear to ask
you whether or not to cancel the setting. Press [Yes] to cancel the set-
ting.
Pressing [Application] will display the Application Screen to allow you
the setting change from that screen.
10
10-5