Konica Minolta bizhub PRESS 1250 User Manual page 68

2.2 Turning On/Off the Power
When the job cannot be continued the next day and the output process
should be continued:
1
Turn on the sub power switch to continue the output.
2
When the job is completed, turn off the sub power switch again.
When the job cannot be continued the next day but still needs to be contin-
ued the next day:
If the message notifying that the job cannot be continued the next day is displayed but the output process
still needs to be continued, you may be able to store the output data and continue the job the next day.
1
To do so, press the [Print a Set] key in the dialog displayed after pressing Stop on the control panel,
if applicable.
When printing the set is completed and the machine stops, the [Print a Set] key will disappear from the
dialog.
bizhub PRESS 1250/1052
2
2-54