Crisscross Non-Sorting ("Non-Sort" Setting); Sorting ("Sort" Setting); Crisscross Sorting ("Sort" Setting); Stapling (With Finisher Fs-135 Installed) - Konica Minolta 8020 User Manual

5

Crisscross Non-Sorting ("Non-Sort" Setting)

The copies are fed out in an alternating crisscross pattern.
However, crisscross non-sorting is only performed if the following conditions are met.
G The finisher is not installed.
G Paper of the same size and type must be loaded with the landscape orientation
(crosswise) in one paper drawer and with the portrait orientation (lengthwise) in an-
other drawer.
G The duplexing document feeder must be used.
G The document must not contain pages of various sizes (i.e., "Mixed Original De-
tection" function not used).
G "Auto Paper" must be selected for the Paper setting.
G Staple and hole-punch Output settings must not be selected.
G The "Criss Cross Mode" function on the User's Choice: 2 screen must be set to "Yes".
H For details on the "User's Choice" functions, refer to "Specifying Default Settings ("User's Choice"
Functions)" in the Administrator Operations volume.

Sorting ("Sort" Setting)

The copies are automatically divided into the specified number of sets with each set containing a copy of
each page.

Crisscross Sorting ("Sort" Setting)

Sets containing one copy of each page are fed out in an alternating crisscross pattern.
However, crisscross sorting is only performed if the following conditions are met.
G The finisher is not installed.
G Paper of the same size and type must be loaded with the landscape orientation
(crosswise) in one paper drawer and with the portrait orientation (lengthwise) in an-
other drawer.
G
The document must not contain pages of various sizes (i.e., "Mixed Original De-
tection" function not used).
G "Auto Paper" must be selected for the Paper setting.
G Staple and hole-punch Output settings must not be selected.
G The "Criss Cross Mode" function on the User's Choice: 2 screen must be set to "Yes".
H For details on the "User's Choice" functions, refer to "Specifying Default Settings ("User's Choice"
Functions)" in the Administrator Operations volume.

Stapling (with finisher FS-135 installed)

The copies are bound together with a staple in the corner.
However, stapling is only performed if the following conditions are met.
G The number of copies is set to between 2 and 30.
G If standard-size paper is used, the paper sizes must be Letter L, Letter C, Executive L (7-1/4 10-1/2
in. L), Executive C (7-1/4
G If standard-size paper is used, the paper width must be between 7-1/4 in. and 11-3/4 in.
G If standard-size paper is used, the paper length must be between 7-1/4 in. and 17 in.
G The copier must not enter Interrupt mode.
5-4
10-1/2 in. C), Legal L and 11
5.2 Selecting an Output Setting
17 L.
Konica 8020/8031
1 1
1 3
2
1 1
4
Example: For 4 sets
1 1
1 1
1
1 1
1
Example: For 4 sets