Konica Minolta bizhub PRESS 1250 User Manual page 282

7.12 Eliminating Copy Marks Along Borders: Frame Center Erase
The Frame Center Erase Screen will be displayed.
4
Select one of the Frame Erase modes or [Center Erase].
% Frame Erase and Center Erase can be used in combination.
5
Specify the width to be erased.
When [Erase/All Sided] is selected, all values under [Erase Width Setting] are highlighted.
% Use the keypad, [,], or [+] on the screen to enter the desired erase width.
% With [Center Erase] selected at the same time, select [Frame] under [Erase Width Setting] before
entering an erasure amount.
When [Erase/Each Side] is selected,
% Select a side from the keys under [Erase Width Setting], then press the keypad, [,], or [+] on the
screen to enter the width to be erased.
% If [Center Erase] is also selected, select [Frame] under [Erase Width Setting] before entering each
value.
bizhub PRESS 1250/1052
7
7-45