Konica Minolta bizhub PRESS 1250 User Manual page 110

4.2 Copy Screen
No. Name
6 Density adjustment keys
7 [Auto Zoom]
8 [Zoom]
9 [RECALL] tab
10 Zoom setting keys
11 [COPY] tab
12 Set Number indicator
13 Simplex/Duplex
14 [SCAN] tab
15 [Application]
16 [STORE] tab
17 [Output Setting]
18 [
19 [
20 Output information indicator
21 Machine management information indi-
cator
22 Machine status indicator/right
23 [Image Rotation OFF]
bizhub PRESS 1250/1052
(Info. Sound/Voice)]
Help]
Description
Pressed to adjust the copy density.
Pressed to use the Auto Zoom function. The key is
highlighted when Auto Zoom is on.
Pressed to display the Zoom Screen which allows you
to specify the magnification ratio of copied image.
Among the functions provided on the Zoom Screen,
the vertical/horizontal zoom, two preset zooms, and
full-size copying can be specified using the keys dis-
played below.
Pressed to retrieve the scanned data.
Press [-]/[+] to specify the vertical/horizontal zoom ra-
tio. Press [x1.0] to select 1.000 magnification ratio.
Press one of the keys with the preset ratios to select
the desired ratio.
Pressed to display the Copy Screen and perform copy
operations.
Indicates the print quantity entered from the control
panel keypad.
Select the simplex/duplex copy mode (1-1, 1-2, 2-1,
or 2-2).
Pressed to display the screen for the scan operations.
For details, see [User's Guide - Network Scanner].
Pressed to display the Application Screen which al-
lows you to select various application functions. Up to
6 icons are displayed under [Application] to indicate
the current selection of application functions. Under
the icon display, you can display up to 4 shortcut keys
for frequently-used application functions.
Pressed to specify a location to store scanned data.
For details, see [User's Guide - Network Scanner].
Pressed to display the Output Setting Screen and
specify output functions. Specified output settings
are displayed as icons in the area under [Output Set-
ting].
Under the icon display, you can display up to 4 short-
cut keys for frequently-used output settings.
Pressed to turn on/off all information sounds or voic-
es.
Pressed to display the help message which provides
information on the screen currently displayed. De-
pending on a screen, [ ] may be grayed out to show
inactivity.
When the Machine Screen is selected, pressed to
show the following maintenance procedures: replen-
ishing toner, paper, staples and glue pellets; replacing
a waste toner box; refilling the water tank; and dispos-
ing stapler scrap, punch scrap and trim scrap.
Indicates the print count, set count, and job number of
the current job while printing.
Indicates the original count of the previous job,
number of reserved jobs, remaining amount of mem-
ory, and remaining HDD capacity.
Displays [Security], [Supply], [PM Call], [Collect], [Mo-
dem Err], [Drum/Dev.], [Fusing Web], [Dark Tone], [Ro-
tation], and [Tandem M (S)]. Up to 5 indicators can be
displayed in large size; when 6 or more indicators are
required, large icons will substitute up to 4th indica-
tors, and small icons will be used from the 5th.
Pressed to activate/deactivate the Image Rotation
function.
4
4-9