Konica Minolta bizhub PRESS 1250 User Manual page 43

2.1 Machine Configuration
External view of Saddle Stitcher SD-506
No. Name
1 Saddle stitcher secondary (sub) tray
2 Multi Tri-Fold mode outlet cover han-
dle
3 Tri-Fold tray
4 Secondary (sub) tray
5 Saddle stitcher right side door
6 Folder tray
7 Trim scrap box
8 Saddle stitcher left side door
Internal view of Saddle Stitcher SD-506
No. Name
9 Lever [SD11]
10 Lever [SD3]
11 Handle [SD10]
12 Lever [SD2]
13 Lever [SD1]
14 Knob [SD6]
15 Jam position display
16 Lever [SD7]
17 Handle [SD8]
18 Lever [SD9]
19 Stapling unit
20 Knob [SD15]
21 Lever [SD5]
22 Lever [SD4]
bizhub PRESS 1250/1052
Description
Holds sets not processed by Saddle Stitcher SD-
506.
Opens upward for removal of mishandled paper.
Holds sets output in Multi Tri-Fold mode.
Holds sets delivered from the machine on the right
side of Saddle Stitcher SD-506.
Opens to allow removal of mishandled paper.
Withdrawn to hold sets output in Fold & Staple or Mul-
ti Half Fold mode.
Withdrawn for removal of waste trimmings.
Opens to allow staple supply or removal of mishan-
dled paper.
Description
Opens to allow removal of mishandled paper inside
the folding unit.
Opens downward for removal of mishandled paper.
Held to withdraw the drawer for removal of mishan-
dled paper inside the folding unit.
Opens upward for removal of mishandled paper.
Opens leftward for removal of mishandled paper.
Turned clockwise to feed mishandled paper to the
folding unit.
Indicates the position of mishandled paper by LED
lamps.
Opens rightward for removal of mishandled paper.
Pulled to open the cover for removal of mishandled
paper.
Opens upward for removal of mishandled paper.
Staples folded sets.
Turned clockwise to feed mishandled paper.
Opens leftward for removal of mishandled paper.
Opens downward for removal of mishandled paper.
2
2-29