Finisher Fs-503 - Konica Minolta bizhub pro 1050 User Manual

Finisher FS-503

3 Secondary (Sub) tray
2 Primary
(Main) tray
1 Finisher door opens to the internal Finisher to allow clearing mishandled paper
and replenishing staples.
2 Primary (Main) tray holds sets output in Non-sort mode, Collated mode (offset),
or Staple mode.
3 Secondary (Sub) tray holds sets output in Non-sort mode.
4 Inlet lever opens leftward to remove mishandled paper.
5 Secondary (Sub) tray conveyance lever (right) opens upward to remove
mishandled paper.
6 Secondary (Sub) tray conveyance lever (left) opens leftward to remove
mishandled paper.
7 Stapler unit conveyance knob can be turned clockwise to feed mishandled
paper to the stapler unit.
8 Stapler unit conveyance lever opens downward to remove mishandled paper.
9 Stapler unit handle withdraws the unit to allow removal of mishandled paper.
10 Stapler unit knob can be turned counterclockwise to ease removal of
mishandled paper.
2-14
1 Finisher door
Machine Configuration (continued)
6 Secondary (Sub) tray
conveyance lever (left)
5 Secondary (Sub) tray
7 Stapler unit conveyance knob
9 Stapler unit handle
10 Stapler unit knob
conveyance lever (right)
4 Inlet lever
8 Stapler unit
conveyance
lever