Inconformity In Paper Size During A Print Job In Progress - Konica Minolta bizhub PRESS 1250 User Manual

11.5 If [MACHINE] Tab Flashes in Orange
4
Press Start on the control panel.
Paper will be fed from newly selected tray to continue the printing operation.
11.5.4

Inconformity in Paper Size During a Print Job in Progress

If the tray to be used for the print data currently transmitted is loaded with paper size other than that specified,
the machine temporarily stops with the message [Please load **** paper in tray # / To check details, touch
[Confirm Details]] displayed.
Two methods are provided to restart printing:
-
Loading the tray with specified paper size
-
Changing the tray selection or paper setting of the selected tray
Follow each procedure to restart the output job.
Loading the tray with specified paper size
1
Load the tray with paper of the specified size. If a feed tray is selected, load that tray with paper of the
specified size.
% For details on loading paper, see page 5-7.
NOTICE
Load paper of the specified size. The machine cannot start the printing operation with a different paper
size loaded. Using different paper type or weight may cause paper misfeed or machine trouble.
After supplying the tray with paper, press [Confirm Detail] to select that tray and then press [OK]; the
message will change to [Press [Start] to restart].
2
Press Start on the control panel.
bizhub PRESS 1250/1052
11
11-22