Konica Minolta bizhub PRESS 1250 User Manual page 138

5.3 Loading Paper
5
Turn the bottom plate fixing knob counterclockwise to loosen
it, slide it to the front, and turn it clockwise to fix the plate.
6
Return the tray to its original position, then withdraw it again after the bottom plate of the tray goes up
completely.
The sound of motor elevating the bottom plate can be heard when the tray is returned in position. After
that automation is completed, again withdraw the tray to find that the bottom plate has been elevated
to the top position.
NOTICE
Be sure not to withdraw the tray till the motor sound stops. Otherwise, the later operation may be af-
fected because the bottom plate is not elevated completely to the top.
7
Fix the position of the top edge of the side guides.
% Move top edges of the side guides to align them to the
paper, then turn the two guide fixing knobs clockwise
to fix the guides.
NOTICE
Avoid making the space between the side guides too wide
or too narrow for the paper to be seated straight.
8
Lower the bottom plate of the tray.
% Turn the bottom plate fixing knob counterclockwise to
loosen it, slide it to the back, and turn it clockwise to fix
the plate. The bottom plate automatically goes down.
bizhub PRESS 1250/1052
5
5-14